Educational Material
Appliance Tests     Battery Diagrams      Glossary      Making of a Solar Cell       Module Tilt and Orientation   Propane Facts     Solar Water Pumping      System Diagrams      System Planning        System Sizing     Warranties    Wire Loss Tables      Using Lead-Acid Batteries   

Contact US     Home 

 

Home Appliances Batteries Battery Accessories Charge Controllers Disconnects/ Fuses Generators Hydro Generators Inverters Junction Boxes Lightning Arrestors Propane Heaters Pumps DC AC Solar Modules Solar Module Mounts System Monitors Trace Power Panels Wind Generators

Inverters

 

New Lower Prices on Xantrex/Trace SW Inverters!

Xantrex/Trace SW Plus 2500, 4000 and 5500 

Power Independence in a Powerful Package

Based on the proven platform of the SW Inverter/Charger Series, Xantrex SW Plus models are designed to provide homes with a completely independent power supply. Each model combines an inverter, battery charger and dual transfer switch in one package.

As part of an off-grid renewable power system, SW Plus Inverter/Chargers convert all forms of renewable energy into utility grade household power. They can also be used as part of a backup power system to automatically provide AC power when utility power fails. For supplementary power, the inverter/chargers can be programmed to automatically start and stop a generator, based on user needs. To save on utility bills, the SW Plus can also be programmed to switch to battery power from utility power during peak-rate periods. The SW Plus is not designed to sell power back to the grid.

Product Features

·          2.5, 4.0 and 5.5 kVA continuous output of sine wave power (to 40º C)

·          Huge surge (inrush current) capacity – up to four times rated output for starting large loads

·          High capacity, multi-function battery charger provides accurate four stage re-charging and maintenance

·          Smart Energy Management system controls utility and/or generator usage

·          Non-volatile memory provides the SW Plus with the ability to save customized settings

·          Energy efficient with 95% peak efficiency and <20 watts of idle current (<2 watt in search mode)

SW Plus 5548  5.5KVA 48 volt input  120 vac/60hz output  75 amp charger  $2975.00

SW Plus 4048  4.0KVA 48 volt input  120 vac/60hz output  60 amp charger  $2380.00

SW Plus 4024  4.0KVA 24 volt input  120 vac/60hz output  120 amp charger  $2380.00

SW Plus 2548  2.5KVA 48 volt input  120 vac/60hz output  40 amp charger  $1954.00

SW Plus 2524  2.5KVA 24 volt input  120 vac/60hz output  70 amp charger  $1954.00

 

Options

GSM  Auto start of 2 or 3 wire generators  $159.00

ALM  User adjustable relays  $159.00

ICM  Full function 25’ inverter remote control module    $275.00

SWI  Stacking cable to allow 240 vac from 2 identical inverters  $45.00

DCCB  DC side conduit box for code compliance  $94.00

ACCB  AC side conduit box.  May be required for code compliance  $315.00

 

Note: SW Plus inverters are not available in power panels.

Back Up Next

 

Trace™ SW Inverters


Trace SW SERIES

 

  • Easier to use programming system
  • New backlight LCD display
  • Improved AC wiring access
  • New "soft start" systems
  • Easy to read owner's manual
  • Enhanced generator start system
 

As an Inverter:

  • Multi step, low distortion sine-wave
  • Up to 96% conversion efficiency
  • Very low idle current
  • Can be used in series (120/240vac)
  • Adjustable search mode as low as 16 watts.
  • Adjustable low battery cutout
  • Protected against over-current, short circuit, over temperature, low & high battery.

As a Battery Charger:

  • Higher charger output from small generators. 
  • Three stage temperature compensated charging with temperature probe.
  • Manual equalize mode
  • Matching of charger to AC source
  • Automatic "back off" system prevents overloading of generators

Sine-wave inverter with 3- stage battery charger, automatic 60 amp AC transfer relay and LCD control panel.  For stand-alone or utility-interactive applications.  Includes automatic generator start system. 

Specifications SW4024 SW4048 SW5548
Nominal Dc Input voltage 24 48 48
A/C Output Voltage (RMS) 120 VAC 120 VAC 120 VAC
Nominal Frequency 60Hz 60Hz 60Hz
Continuous Power @ 20° 4000 VA 4000 VA 5500 VA
Continuous A/C Output (@25°C) 33 Amps 33 Amps 46 Amps
Maximum A/C Output (RMS) 78 Amps 78 Amps 78 Amps
Peak Efficiency 94% 95% 96%
Automatic A/C Transfer Relay 60 Amps 60 Amps 60Amps
Maximum Charge Rate 120 Amps DC 60 Amps DC 75 Amps DC
DC Input Requirements
Search Mode 1 Watt 1 Watt 1 Watt
On Mode (no load-Idle) 16 Watts 16 Watts 16 Watts
At Full Rated Power 200 Amps D/C 100 Amps D/C 137 Amps
Short Circuited Current 360 Amps D/C 360 Amps D/C 180 Amps D/C
Input Voltage Range 22-33 volts D/C 22-33 volts D/C 44-66 volts D/C
A/C Output Characteristics Common To All Of The Above Models
A/C Output Waveform:   Sinewave with 34 to 52 steps per cycle
Voltage Regulation:   +/- 2%
Total Harmonic Distortion:   3-5% in off grid applications
Power Factor Allowed:    -1 to 1%
Frequency Regulation:   +/- 0.04% (crystal regulated)
Load Sensing Range:   16 to 240 watts
Physical Characteristics Common To All Of The Above Models
Enclosure Type:   Indoor ventilated steel chassis with powder coated finish
Specified Temperature Range:   32°-104° (output will meet specified tolerances)
Allowed Temperature Range:   -40
Dimensions (Inverter only):   15"H x 22.5"L x 9"D
Dimensions (Shipping):   20.5"H x 27"L x 15.5"D
Mounting:   Wall or Shelf
Weight (Inverter only) 105 lbs 105 lbs 136 lbs
Weight (shipping) 111 lbs 111 lbs 143 lbs

 

Model Kw Input Output Charger Your Price
SW5548 5.5 48 120 VAC 60 70 $2,932.00